Metal wing Air-bike?

larrymoody · Posts: 11 Join date: 2008-08-29

Hey River1,

What else can you tell me about the metal wing air bike you mentioned?

Like... what's the overall cost?

In the meantime, I think it makes sense to take another look at that MX I have in storage to see what it *really* takes to get it flying.

Thanks

Larry

river1 · Posts: 25 Join date: 2008-07-22 Location: 66W 18.5N

Larry , The person name is Steve , he posts here , http://www.lonesomebuzzards.com/cgi-bin/forum/Blah.pl , his user name is walkabout . When you get there at the bottom there is something that says "bbs forum anoucements" , in there look for the thread "airbike copywrights " and you'll see photo's and Steve can tell you when it's going to be ready .

PR

lansair · Posts: 2 Join date: 2009-02-20

Why not a carbon fiber tubing and a composite construction wing??? Then a 2 cyl.4 stroke engine??? Strong,light weigh with a dependable 4 stroke engine. Lansair

Chris · Subject: Re: Metal wing Air-bike? Fri Mar 13, 2009 12:43 pm

All good ideas lansair but I think that would destroy the AFFORDABLE part of it. It would be a neat plane though if someone took the time and money to do it Twisted Evil

Chris

_________________
never run out of altitude airspeed and ideas at the same time

3 things that dont matter altitude above you runway behind you and the gas back at the hanger

takeoff is optional landing is mandatory

Fly only in the middle of the air, the edges are identified by buildings trees and houses, and it is much more difficult to fly there.

It is better to be on the ground wishing you were flying then flying and wishing you were on the ground!